Saturday, October 29, 2011

Catching up

I have a lot of catching up to do. I have been watching too much Cardinals baseball (World Series Champs!), so I haven't been doing much else in the evening. Sorry! I was going to attempt to put things in chronological order, but I don't think there's much point. So here's a hodgepodge of things I did today as well as things we have been working on for the past few months.

Lindsay had to work this evening, so I had a chance to knock some things off my "Honey Do" list. The first thing I did was put the side panel on our pantry. That's the last piece of the puzzle as far as cabinets go in the kitchen.



The general idea with these panels is to use wood glue along with finishing nails. The wood glue gets the panel to stick nicely to the side of the cabinet, and the nails hold it there while it dries. I use some C-Clamps to hold it on while I'm working on getting the nails in.



Yes, I left my hammer on top of the pantry and spent half an hour looking for it.

By the way, in the last month or so, I made this round shelf thing and installed it.



I'm not 100% satisfied with the results -- cutting circles is an art I haven't mastered yet. In case you are wondering, the whole thing is made out of MDF. I finished it with a red oak veneer, then painted it. The shelves are glued and screwed. Attaching it to the wall was "fun". I didn't want any exposed screws at all, so I ended up recessing some toggle bolts to attach it to the wall (and normal bolts to attach it to the corner cabinet). In short, I drilled a small hole for the bolt shaft, then drilled a large hole for the bolt head - but only partially through the original hole. After everything was attached, I used wood filler to cover the bolt heads, then sand/prime/paint. Voila! (I took some pictures, but they were on my old phone and I forgot to transfer them before I sold it. Whoops!) EDIT: See a schematic here.


In other news, Lindsay found a microwave for $25 on Craigslist. We made a field trip to get it (about 30 minutes) and got Cracker Barrel on the way home (yum). I had to replace the handle (see: Wife wanted a new handle), so I bought one for $17 off Amazon and put it on. Final Cost: $42 + Cracker Barrel. Not bad.



Finally, we also put in a new ceiling fan. This was definitely a group project.



We had to kill the electricity, then take off the old fan and hang the new one. Unfortunately, I wanted to wait until the game was over (since the fan and the TV are on the same circuit). However, I also had to tutor from 11p to midnight (I tutor Calculus and Physics on tutor.com!), so we only had about a 45m window. As it turns out, this isn't enough time. So we ended up finishing it at like 12:30 or 1a. Wooooo!

The window behind the sink in the kitchen doesn't have a sill right now, since we ripped it out when we installed the new backsplash. Unfortunately, I have no experience with creating window sills. So I decided to experiment by using some scrap wood I had downstairs. Actually, it was part of the packaging of some furniture we bought like two years ago. I should probably throw some things out ...



Using my trusty jig saw and table saw, I made a template out of plywood scrap, then a 'final product' out of the aforementioned "wood".



I installed it to see if I like the size/shape. I can't decide if it should be flush with the tiles or come out a bit like it does now. Thoughts?



The final task for today was replacing one of the flanges on our outside fence. At some point, it broke. I went to Lowes and found a flange for it and replaced it.



This project was a good excuse to use my new corded hammer drill. (I also used it for installing the microwave. It was originally purchased for mixing tile adhesive / drywall mud.) Again, I bought a quality (read: expensive) drill that had good reviews and it totally was worth it. I installed a third concrete anchor, since previously there were only 2. This drill killed the 2" of concrete I had to drill through -- took about 10 seconds.



My lab is moving, so we are throwing out a lot of old stuff. I took possession of an old drill that didn't work anymore (or at least, the battery doesn't charge anymore). I had been needing a new case for my new drill, so I just ripped all the plastic walls out of it! It fits great!



We recently took a trip to our city's "free mulch pile" and loaded up our car for our new plants. We are always impressed with how much our little car can handle. Check it out!



I usually try to end with a cute picture of my wife, since she is prettier than my tools/projects. Hope you made it all the way to the end of this monster post. Phew.

4 comments:

  1. Nice move with the picture of wife at end and related comments - brownie points for sure.

    And you get the Florida-Based Electricians Society Seal of Approval for the following statement:

    "We had to kill the electricity, then ....."

    Mr. T.

    ReplyDelete
  2. The only thing about the killing the electricity is we didn't kill it power to the house, just that circuit, so I'm not sure if that meets yours standards :/
    - Lindsay

    ReplyDelete
  3. I think it is nice to have a window sill in a kitchen come out a bit so that you can put a small pot of herbs on the sill...just a thought!

    ReplyDelete
  4. We actually have the same ceiling fan, and in the same color too. Haha! What a coincidence! Mine was installed a month ago. I really like it because it made my room look so much classier, largely because of the color. Anyway, how is your ceiling fan now?

    ReplyDelete